RJM COMPOSITES LLC
(517) 566-3200     sales@rjmcomposites.com

Description:

P-705 Kick Back Adhesive is a zero VOC and isocyanate free high impact resistant adhesive developed for Kick Back repairs. P-705 Kick Back Adhesive is tough, elastic, and waterproof. P-705 will bond aggressively to Wood, Steel, and aluminum.

Directions:

After repairing the kick back area with P-700 Wood Bond Kick Back Patch, and once the entire area has been sanded flat, trace the new kick back panel to out line the area. Use a standard caulk gun, and run beads directly on the kick area. Use a 3/32 to 1/8” trowel to spread the P-705 adhesive. One tube should cover two 15”x40” kick back panels. Put the new kick back panel into place and screw in to secure. Allow two hours for complete cure before using the lane.

Material Handling Properties:

Mix ratio: Single component

Specific gravity……………………………………………………………………………………..(1.5)

Work time @ 25C/77F…………………………………………………………………………....20 Min.

Elongation (ASTM D-412)……………………………………………………………………….....310 %

Viscosity …………………………………………………………………………………………….Paste

Shelf life (unopened @ 25C/77F)………………………………………………………………11 months

Color………..Black

Cured Hardness Shore A……………………………………………………………………………...64